Condition: Unlocked 203CCuo
Reg. Price: [price_original_slashed_nobr]
Our Price: [price_for_sale]
Quantity [quantity_box_show]
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
Subaru Impreza (With Push-Button Start ONLY) Years: 2017 2018 2019 2020
Subaru Legacy (With Push-Button Start ONLY) Years: 2018 2019 2020
Subaru Outback (With Push-Button Start ONLY) Years: 2018 2019 2020
Subaru Ascent (With Push-Button Start ONLY) Years: 2019 2020
Subaru Crosstrek (With Push-Button Start ONLY) Years: 2018 2019
Subaru Forester (With Push-Button Start ONLY) Years: 2019 2020
Subaru WRX (With Push-Button Start ONLY) Years: 2019
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) Unlocked /Virgin replacement Subaru Factory Original Equipment O.E.M. keyless remote control transmitter that will program to your car's RKE system once reflashed.(Key blade NOT included) Compatibility: Match FCC ID #'s with your existing remote control. Programming & Key Cutting Requirements: This REMOTE requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. DO NOT GO TO A DEALER. HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA: 1.Go to google.com 2. Type in the words: Automotive locksmith 3. Then type in your ZIP code 4. click search 5. google will compile a list of local automotive locksmiths for you! 6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer 3 Steps: 1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system. 2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine. 3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition
This is ONE (1) Unlocked /Virgin replacement Subaru Factory Original Equipment O.E.M. keyless remote control transmitter that will program to your car's RKE system once reflashed.(Key blade NOT included) Compatibility: Match FCC ID #'s with your existing remote control. Programming & Key Cutting Requirements: This REMOTE requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. DO NOT GO TO A DEALER. HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA: 1.Go to google.com 2. Type in the words: Automotive locksmith 3. Then type in your ZIP code 4. click search 5. google will compile a list of local automotive locksmiths for you! 6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer 3 Steps: 1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system. 2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine. 3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition
Specifications
Condition
Unlocked 203CCuo
FCC ID
FCC ID HYQ14AHK
Part#
1551A-14AHK
HYQ-14AHK, HYQ 14AHK, HYQ14AHK, HYQI4AHK, HYO14AHK, HY014AHK
Denso Corporation Electronic Key 14AHK
Part Number: 88835-FL03A / 88835-FL030 / 88835FL03A / 88835FL030
IC: 1551A14AHK
Model#: 14AHC 1A-14AHK
DENSO
MODEL 14AHK COFETEL
Denso Corporation - HYQ (Japan)
Dealer part #
281451-5801 88835FL03A 88835-FL030
Buttons
4: Lock, Unlock, Trunk, Panic
Frequency
315 MHz Red Flashing LED Light
Battery Type
1: CR2032
Additional Information
Condition Explanation: Pre-Owned
_____________________________________________________________
Programming Requirements: Circuit board must be reflashed.
Contact your local automotive locksmith to be sure that they can unlock/reflash this for you.
Programming & Key Cutting Requirements:
This REMOTE requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer
3 Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Subaru Impreza (With Push-Button Start ONLY) Years: 2017 2018 2019 2020
Subaru Legacy (With Push-Button Start ONLY) Years: 2018 2019 2020
Subaru Outback (With Push-Button Start ONLY) Years: 2018 2019 2020
Subaru Ascent (With Push-Button Start ONLY) Years: 2019 2020
Subaru Crosstrek (With Push-Button Start ONLY) Years: 2018 2019
Subaru Forester (With Push-Button Start ONLY) Years: 2019 2020
Subaru WRX (With Push-Button Start ONLY) Years: 2019