Condition: Pre-owned Green LED 968Apo
Reg. Price: [price_original_slashed_nobr]
Our Price: [price_for_sale]
Quantity [quantity_box_show]
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
Subaru Forester Engine Starter H001SSG502 Years: 2014 2015 2016 2017 2018 2019 2020
Please note there are several different looks AND Logos for this remote control car starter - some have Subaru Logos and Some have Ford Logos - all have the same circuit board and will program the same.
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) Subaru Dealer Installed Original Equipment O.E.M. keyless remote control transmitter vehicle starter that will program to your vehicle's compatible installed engine starter kit system. Allows vehicle to be started by pushing a button from the convenience of home or the office (up to 400 feet away depending on obstructions) so that the vehicle s interior temperature is more comfortable upon entry. (remote control ONLY) Programming this remote: For the remote you purchased see this link PAGE 6 https://fccid.io/ELVATRKC/Users-Manual/User-Manual-1852717 Adding Remote Controls to your system Instructions: They system has the ability to operate from up to eight (8) remote controls. Follow these instructions to add a remote to your system. 1. Open driver's door and enter vehicle (shifter in park). 2. Press and hold the brake pedal. 3. Turn vehicle ignition to the ON position and then to the OFF position 6 times, ending in the ON position...until it chirps and leave key in the ON position at that point. (NOTE:you Must Toggle key on and off 6 times within 8 seconds to get horn to chirp. ) 4. The horn will chirp 3 times to indicate the unit has entered program mode. (once it chirps, you have to take your foot off the brake pedal) 5. Release Brake Pedal. 6. Press the Start button on your remote to be programmed. 7. The horn will sound once, indicating the system has learned that remote. 8. Repeat step 5 for any additional remotes. 9. Turn the vehicle ignition OFF to exit program mode. Test all remotes.
This is ONE (1) Subaru Dealer Installed Original Equipment O.E.M. keyless remote control transmitter vehicle starter that will program to your vehicle's compatible installed engine starter kit system. Allows vehicle to be started by pushing a button from the convenience of home or the office (up to 400 feet away depending on obstructions) so that the vehicle s interior temperature is more comfortable upon entry. (remote control ONLY) Programming this remote: For the remote you purchased see this link PAGE 6 https://fccid.io/ELVATRKC/Users-Manual/User-Manual-1852717 Adding Remote Controls to your system Instructions: They system has the ability to operate from up to eight (8) remote controls. Follow these instructions to add a remote to your system. 1. Open driver's door and enter vehicle (shifter in park). 2. Press and hold the brake pedal. 3. Turn vehicle ignition to the ON position and then to the OFF position 6 times, ending in the ON position...until it chirps and leave key in the ON position at that point. (NOTE:you Must Toggle key on and off 6 times within 8 seconds to get horn to chirp. ) 4. The horn will chirp 3 times to indicate the unit has entered program mode. (once it chirps, you have to take your foot off the brake pedal) 5. Release Brake Pedal. 6. Press the Start button on your remote to be programmed. 7. The horn will sound once, indicating the system has learned that remote. 8. Repeat step 5 for any additional remotes. 9. Turn the vehicle ignition OFF to exit program mode. Test all remotes.
Specifications
Condition
Pre-owned Green LED 968Apo
FCC ID
ELVATRKC
Part#
367B-43603200
MODEL: 4360415
IC: 3671B-4363200
Remote Engine Starter that used to be H001SSG000 is now H001SSG500
H001SSG101 This product Replaces: H001SSG500, H001SSG501, H001SSJ001 H001SSJ000
Part Number: H001SSG460
Supersession(s): H001SSG060; H001SSG461
Replaces: H001SSG500, H001SSG501
4360320 H001SSG500,
H001SSG501 H001SSG502
H001SSG501
Pg 252,
JU1040
IC# 3671B-43603200
FCC ID ELVATRKC
ELV-ATRKC, ELV ATRKC, ELVATRKC
Nutek Corporation Transmitter ATRKC
Please note there are several different looks AND Logos for this remote control car starter - some have Subaru Logos and Some have Ford Logos - all have the same circuit board and will program the same.
Dealer part #
4360415 4360320 3671B-43603200
Buttons
1: Engine Starter / Green LED Light
Frequency
433.92-433.92 MHz
Battery Type
1: CR2032
Additional Information
Please note there are several different looks AND Logos for this remote control car starter - some have Subaru Logos and Some have Ford Logos - all have the same circuit board and will program the same.
...............................
Condition Explanation: Pre-Owned
Pre-Owned = Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections.
___________________________________
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Subaru Forester Engine Starter H001SSG502 Years: 2014 2015 2016 2017 2018 2019 2020
Please note there are several different looks AND Logos for this remote control car starter - some have Subaru Logos and Some have Ford Logos - all have the same circuit board and will program the same.