Condition: New H chip U.S built ONLY 121Dno
Reg. Price: [price_original_slashed_nobr]
Our Price: [price_for_sale]
Quantity [quantity_box_show]
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
Toyota Rav4 IMPORTANT: PLEASE MAKE SURE TO SELECT PROPER KEY FOR YOUR VEHICLE. THERE ARE 2 OPTIONS. This remote will only work for vehicles built in USA. VIN number starts with 2. Years: 2013 2014 2015 2016 2017 2018
Toyota Highlander Years: 2014 2015 2016 2017 2018 2019
Toyota Sequoia Years: 2019 2020
Toyota Tundra Years: 2018 2019 2020 2021
Toyota Tacoma (please make sure to match FCC ID, as there are 2 options available) Years: 2016 2017 2018 2019
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) Brand New replacement keyless remote control transmitter with transponder immobilizer 4d74 installed that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system. NOTE: No LOGO on back of cover Compatibility 1: FCC ID/Part number(s) on your current remote >> located on the inside circuit board - you must open the shell at the keyloop end and look at the numbers on the outside of the circuit board case <<< described below MUST match the FCC ID # listed below. Compatibility 2: Original remote AND key transponder chip type must match the remote pictured and detailed. IF YOU ARE UNSURE OF WHAT PART # YOU NEED: call your local DEALER PARTS DEPT. with your VIN# and ask for a Part #. -------------------------------------- IMPORTANT: PLEASE MAKE SURE TO SELECT PROPER KEY FOR YOUR VEHICLE. THERE ARE 2 OPTIONS. -------------------------------------- Programming and Key Cutting: Your remote requires diagnostic programming available at your local LOCKSMITH. DO NOT GO TO A DEALER. HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA: 1.Go to google.com 2. Type in the words: Automotive locksmith 3. Then type in your ZIP code 4. click search 5. google will compile a list of local automotive locksmiths for you! 6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car. This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS . PROGRAMMING THE REMOTE THREE (3) Steps: 1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system. 2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine. 3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
This is ONE (1) Brand New replacement keyless remote control transmitter with transponder immobilizer 4d74 installed that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system. NOTE: No LOGO on back of cover Compatibility 1: FCC ID/Part number(s) on your current remote >> located on the inside circuit board - you must open the shell at the keyloop end and look at the numbers on the outside of the circuit board case <<< described below MUST match the FCC ID # listed below. Compatibility 2: Original remote AND key transponder chip type must match the remote pictured and detailed. IF YOU ARE UNSURE OF WHAT PART # YOU NEED: call your local DEALER PARTS DEPT. with your VIN# and ask for a Part #. -------------------------------------- IMPORTANT: PLEASE MAKE SURE TO SELECT PROPER KEY FOR YOUR VEHICLE. THERE ARE 2 OPTIONS. -------------------------------------- Programming and Key Cutting: Your remote requires diagnostic programming available at your local LOCKSMITH. DO NOT GO TO A DEALER. HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA: 1.Go to google.com 2. Type in the words: Automotive locksmith 3. Then type in your ZIP code 4. click search 5. google will compile a list of local automotive locksmiths for you! 6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car. This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS . PROGRAMMING THE REMOTE THREE (3) Steps: 1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system. 2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine. 3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
Specifications
Condition
New H chip U.S built ONLY 121Dno
FCC ID
GQ4-52T
Part#
890700C050 or 897010C030 890710R040 890700R120 890700R121 890700R130
REPLACES Toyota Part Numbers: 89071-0R040, 89070-0R120, 89070-0R121, 89070-0R130, 89070-0C050
REPLACES 1470A-33T
REPLACES P:226624-101
'H' Chip
REPLACES Chip ID: TEXAS ID 4D H
H on blade
U.S. Built
(FCC ID on the back of your remote (inside the case) GQ4-52T)with H on blade U.S. Built
COMPATIBILITY IMPORTANT PLEASE READ:
--------------------------------------
IMPORTANT: PLEASE MAKE SURE TO SELECT PROPER KEY FOR YOUR VEHICLE. THERE ARE 2 OPTIONS.
1. THIS ONE = replacement for Toyota Part Numbers: 89071-0R040, 89070-0R120, 89070-0R121, 89070-0R130, 89070-0C050
FCC ID on the back of your remote (inside or outside the case) replacement for Toyota GQ4-52T
This remote will only work for vehicles built in USA.
VIN n
Dealer part #
89070-0C050 or 89701-0C030 or 89070-0R130 or 89070-0R120 or 89071-0R040 or 89070-0R121
Buttons
3: Lock, Panic, Unlock / New Key
Frequency
315 Mhz with Red LED Light
Battery Type
1: CR2016
Additional Information
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Toyota Rav4 IMPORTANT: PLEASE MAKE SURE TO SELECT PROPER KEY FOR YOUR VEHICLE. THERE ARE 2 OPTIONS. This remote will only work for vehicles built in USA. VIN number starts with 2. Years: 2013 2014 2015 2016 2017 2018
Toyota Highlander Years: 2014 2015 2016 2017 2018 2019
Toyota Sequoia Years: 2019 2020
Toyota Tundra Years: 2018 2019 2020 2021
Toyota Tacoma (please make sure to match FCC ID, as there are 2 options available) Years: 2016 2017 2018 2019