Eagle key fob fits Eagle keyless remote MR123944 FCC ID GQ43VT6T Keyless Remote Entry Clicker Transmitter Keyfob Controller Vehicle Car Truck Security System Door Opener Fab - Pre-Owned 2 button 199Apoo

Specifications

Condition	Pre-Owned 2 button 199Apoo
FCC ID	GQ43VT6T
Part#	TRW ISC:1470 K1362
Dealer part #	MR123944
Buttons	2: Lock, Unlock
Frequency	315 MHz
Battery Type	1: CR2032

---

Additional Information

Condition Explanation: Pre-Owned 
Pre-Owned: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections. 
______________________________
_______________________________________ 
 
Programming:
Programming the alarm to accept the Mitsubishi GQ43VT6T keyless remote (or have dealer do it):
1. Locate the OBD2 Data Port.
2. Insert keys in ignition and leave in the OFF position.
3. Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port with a suitable jumper wire, leave jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.
4. Within 10 seconds after connecting the jumper wire, turn the ignition switch to the ACC position and then back to OFF. Note: The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode.
5. Press the LOCK button on the transmitter to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
6. If there are two remotes, register the first, then register the second. Repeat step 5 within one minute to program second remote. After completing the second programming, the doors will lock and unlock once.
7. Disconnect the programming wire and remove the keys from the ignition.
 

• All remotes include working batteries (except case-only purchases)
• A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle