Condition: Pre-Owned 577po
Reg. Price: [price_original_slashed_nobr]
Our Price: [price_for_sale]
Quantity [quantity_box_show]
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) ready to program with battery installed Aftermarket keyless remote control transmitter that will work with your vehicle s compatible aftermarket security system once programmed to sync with your vehicle s aftermarket installed security system. See description below for program requirements
This is ONE (1) ready to program with battery installed Aftermarket keyless remote control transmitter that will work with your vehicle s compatible aftermarket security system once programmed to sync with your vehicle s aftermarket installed security system. See description below for program requirements
Specifications
Condition
Pre-Owned 577po
FCC ID
OXC743301
( Alternate spellings: 0XC743301 )
Interchangeable FCC IDs:
OXC743301 PF743301
Part#
Dealer part #
Buttons
4: Arm, Disarm, Panic, Trunk; LED Red
Frequency
433 - 434 MHz
Battery Type
1: GP23A
Additional Information
Condition Explanation: Pre-Owned
Pre-Owned: A Karr OXC743301 key fob that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections.
_____________________________
PROGRAMMING:
Programming Instructions:
1. Sit in your CAR with your Karr alarm remote replacement. Turn your ignition key in the ignition to the "On" position.
2. Move the valet switch on the alarm system to "On" and then back to "Off" three times. Wait for the LED light on the system to flash and then emit a chirp sound.
3. Hold down the transmitter button on the remote for three seconds. Then hold down button number two for three seconds.
4. Wait for the system to chirp again. Remove your key from the ignition to complete the process.
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
This remote is compatible.
This remote is not compatible.
