Condition: Pre-Owned 759po
Reg. Price: [price_original_slashed_nobr]
Our Price: [price_for_sale]
Quantity [quantity_box_show]
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
THIS REMOTE WILL WORK WITH THE
E-2100 E-2300 E-2500 E-2500-S E-3000
AU-REC-6 ATV AU-REC-6S
AU-REC-7 ATV AU-REC-7ST
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) Aftermarket keyless remote control transmitter that will work once programmed to sync with your vehicle s compatible aftermarket installed security system. Programming Instructions: This remote will need to be programmed to your vehicles' matching aftermarket RKE security system in in order to work with your vehicle. Please scroll down to ADDITIONAL INFORMATION to locate programming requirements for this aftermarket system or check the owner's manual that came with the system. Compatibility: To make sure this will work with your installed alarm keyless entry system: 1. Does your current remote look like this remote? and if not/ scroll below to COMPATIBILITY - is your system listed there? 2. Does your current remote match one of the FCC ID or Part #'s listed below? 3. Does your current remote have the same color led light? Attention: Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same.
This is ONE (1) Aftermarket keyless remote control transmitter that will work once programmed to sync with your vehicle s compatible aftermarket installed security system. Programming Instructions: This remote will need to be programmed to your vehicles' matching aftermarket RKE security system in in order to work with your vehicle. Please scroll down to ADDITIONAL INFORMATION to locate programming requirements for this aftermarket system or check the owner's manual that came with the system. Compatibility: To make sure this will work with your installed alarm keyless entry system: 1. Does your current remote look like this remote? and if not/ scroll below to COMPATIBILITY - is your system listed there? 2. Does your current remote match one of the FCC ID or Part #'s listed below? 3. Does your current remote have the same color led light? Attention: Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same.
Specifications
Condition
Pre-Owned 759po
FCC ID
L2MET7B
Part#
107-06 or 107-07 P/N MODEL: Part # R&D #107-07 - Circuit Board #: ET7B or ET7A GROUP 1E
BOARD #: 789F
Dealer part #
Buttons
3: Lock Unlock Option and LED Light Color: GREEN
Frequency
433 MHz
Battery Type
1: GP23A
Additional Information
Attention: Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same.
_____________________________
Condition Explanation: Pre-Owned
Pre-Owned: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections.
__________________________________________________
This remote will need to be programmed to your vehicle with your vehicle in order to work with your vehicle.
Programming Transmitter Codes To An Executive System-
To use an additional or replacement transmitter, it's code must first be added to the Executive System module's memory.
The dealership where you purchased your Executive System can provide and program transmitters.
In the event you wish to program a transmitter, please follow these procedures carefully:
1) Have all the transmitters that you wish to operate your Executive System at hand. Any time a transmitter code is programmed into your Executive System, the existing codes are all erased. This, in addition to the Code Verification feature, prevents someone from adding an unauthorized transmitter to your system.
2) Within 5 seconds, turn the ignition switch "on" five times: "on", "off", "on", "off", "on","off", "on", "off", then "on" again; the fifth time leaving it "on".
3) The doors will unlock, lock, then unlock * again to indicate that the system is ready to receive and store transmitter codes.
4) Within 10 seconds press the LOCK button on the first transmitter you wish to use until the doors lock and then unlock. This indicates the transmitter's code is learned by the system. It is only necessary to press the LOCK button as the rest of the transmitter's functions are stored automatically.
5) Repeat Step 4 within 10 seconds for the second transmitter, then continue this step with each of the transmitters (up to four) that you wish to operate your Executive System. The system will leave transmitter programming mode when the ignition switch is turned "off" or after 10 seconds of no transmitter activity, or upon learning the fourth transmitter.
*If equipped with factory installed power door locks.
Operating Multiple Vehicles From One Transmitter:
Because each transmitter is unique andit's code is stored by the Keyless/Security unit, operating multiple vehicles is simply a matterof following the code programming procedure with each vehicle.
NOTE: When the vehicles are park
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle