Condition: Pre-Owned Red LED 882Apo
Reg. Price: [price_original_slashed_nobr]
Our Price: [price_for_sale]
Quantity [quantity_box_show]
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
Compatible with the following Code Alarm Installed Aftermarket systems:
CA4050
CA4051
CA4053
CA-4050
CA-4051
CA-4053
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is for one (1) remote car starter key fob. You will receive one of the remotes pictured. This is an aftermarket keyless remote control transmitter car starter that will work with your vehicle's compatible CAR STARTER installed system once programmed.
This is for one (1) remote car starter key fob. You will receive one of the remotes pictured. This is an aftermarket keyless remote control transmitter car starter that will work with your vehicle's compatible CAR STARTER installed system once programmed.
Specifications
Condition
Pre-Owned Red LED 882Apo
FCC ID
H5OT45
Part#
Code Alarm CAT1 (same as CATX1B) 1-Button Remote Starter Replacement Remote
1 Code Alarm CAT1 (same as CATX1B just new model) 1-Button Replacement Remote
Includes Qwiksync DIY Remote Programming Guide w/Tech Support
FCC ID Compatibility: H5OT45, H50T45, H5OTR44, H50TR44, H5OT67, H50T67
Equivalent part numbers: CAT1, CATX1B, CATX-1B, CA1B, CA1B5, CA1BTW5, PN1, 41800252
Replacement Remote for Code Alarm Remote Starter Models: CA4050, CA4051, CA4053, CA4054, CA4552, CA4553, CA4554, CA4055, CA4555, Panther PA420C & 41800252
Dealer part #
Buttons
1:Car Vehicle Engine Starter; Red LED Light
Frequency
434 MHz
Battery Type
1: CR2032
Additional Information
Attention: Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same.
_____________________________
Condition Explanation: Pre-Owned
Pre-Owned: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections.
__________________________________
Programming Instructions:
Turn the ignition ON.
Press and hold the valet/override button.
Within 10 seconds the system will chirp (3) three times.
Press 1 button of each transmitter you wish to program.
The system will respond with 1 light flash for each accepted transmitter.
Pressing the override button at any time during programming will advance to the next bank.
NOTES:
The system will exit transmitter programming after 15 seconds of inactivity.
This system has 1 button programming which programs all channels of the system.
The system will hold up to 4 transmitters in memory, programming a 5th transmitter will erase the oldest transmitter in memory.
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Compatible with the following Code Alarm Installed Aftermarket systems:
CA4050
CA4051
CA4053
CA-4050
CA-4051
CA-4053
This remote is compatible.
This remote is not compatible.
