Condition: Pre-Owned Red38
Reg. Price: [price_original_slashed_nobr]
Our Price: [price_for_sale]
Quantity [quantity_box_show]
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
COMPATIBLE WITH THE FOLLOWING AFTERMARKET INSTALLED SYSTEMS:
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) aftermarket keyless remote control transmitter.
This is ONE (1) aftermarket keyless remote control transmitter.
Specifications
Condition
Pre-Owned Red38
FCC ID
NJQ372HAF
Part#
Dealer part #
Buttons
5: Starter Stop, ?/Trunk, Lock, Unlock; Green LED Light
Frequency
433 Mhz
Battery Type
AAA
Additional Information
Condition Explanation: Pre-Owned
Pre-Owned: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections.
___________________________________
Programming Instructions:
This remote will need to be programmed to your vehicle with your vehicle in order to work with your vehicle.
Four different remote controls can be programmed for a given vehicle. If a fifth remote is added, the first remote is deleted.
Note:When the first code learning command is sent, all the old codes are cleared out. Therefore if you want to add a new remote, all the old ones must be reprogrammed as well.
One or more remote transmitters can be added. To do this, programming is accessed as follows:
1. Open hood.
2. Insert key in the ignition and turn to the RUN position.
3. Apply the brakes once.
4. You now have 10 seconds to turn the key from RUN to the STOP position 3 times.
5. If this sequence is correctly carried out, the control module flashes parking lights (4 flashes). You may then proceed to the next step.
6. Press the KEY button on the new remote control. When access code of new remote control is memorized, the control module will confirm with flashing parking lights (1 flash).
7. Repeat the above procedures for each remote control that has to be programmed (up to 4 remotes).
8. Apply the brakes.
9. New remote(s) is (are) now added to the system.
If your vehicle is equipped with a function that automatically sets driver preferences (seat, mirrors, etc.) and the system is configured to control it, the remote controls programmed in positions 1 and 2 will control the settings for the first driver and the remote controls programmed in posit ions 3 and 4 will control the settings for the second driver. If you only have two remote controls, program the first one twice and the second one twice to occupy the four memory locations of the system.
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
This remote is compatible.
This remote is not compatible.
