Order by 1PM EST for Same-Day ShippingSAME DAY SHIPPING On Orders Placed By Noon ESTWe are OPEN & here to serve you.
10% OFF orders of TWO or more discount applied at checkout
Phone Orders: 
272-230-11898am - 6pm EST
30 DAY GUARANTEE 
Menu avatar

Buy 2 Remotes Get 12% Off

Dodge keyless remote for Dodge OHT692713AA OHT692715AA OHT692427AA KOBDT04A car starter key fob control transmitter - NEW DJC23DGso


Loading Images...
keyless remote for Dodge OHT692713AA OHT692715AA OHT692427AA KOBDT04A car starter key fob control transmitter

Condition: NEW DJC23DGso

Reg. Price: $62.49

Our Price: $49.99

Quantity

Unsure if this is compatible with your vehicle? Click here.

In-Stock. May ship same day if ordered by 12pm.

Choose another option:


Compatible Vehicles

FOR THIS FCC ID / PART #

Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012

Dodge Dakota (w/ Transponder)
Years: 2004 2005 2006 2007 2008 2009 2010 2011

Dodge Durango (w/ Transponder)
Years: 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013

Dodge Magnum
Years: 2005 2006 2007

Dodge Nitro
Years: 2007 2008 2009 2010 2011 2012

Dodge Ram 1500 2500 3500
Years: 2006 2007 2008 2009

Unsure if this is compatible with your vehicle?

Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.

check compatibility

This is ONE (1) Brand NEW virgin keyless remote control transmitter that will work with your vehicle's compatible Factory Original Equipment O.E.M. installed RKE (remote keyless entry) system once programmed with a new key blade.

You are wise, so don t pay extra hard earned money for a keyless entry remote head key fob from the Dealership! And don t keep buying cheap knock offs over and over from a Big Box Online Retailer! Get great value and save money on this high quality, long lasting remote from KeylessRemoteWarehouse.com! Guaranteed to have the correct transponder chip to work with your vehicle. We work hard to offer high quality products to you at a fraction of the Dealership markup that will last longer than the competitor knock offs. Get high quality at rock bottom prices.

Compatibility 1: Match FCC ID # listed below with your current remote's FCC ID #.

Compatibility 2: Match Your part #'s listed below with your current remote's part #.

NOTE: this remote will have one of the following LOGOS; NONE, Jeep, Dodge, Chrysler, Ram > all logos are interchangeable the circuit boards are identical and the circuit boards will be UNLOCKED or new and ready to program to your vehicle


Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH. Programming Source prior to purchase to ensure they have the equipment to sync this remote to your vehicle.
DO NOT GO TO A DEALER.

HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.

This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .

PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.

This is ONE (1) Brand NEW virgin keyless remote control transmitter that will work with your vehicle's compatible Factory Original Equipment O.E.M. installed RKE (remote keyless entry) system once programmed with a new key blade.

You are wise, so don t pay extra hard earned money for a keyless entry remote head key fob from the Dealership! And don t keep buying cheap knock offs over and over from a Big Box Online Retailer! Get great value and save money on this high quality, long lasting remote from KeylessRemoteWarehouse.com! Guaranteed to have the correct transponder chip to work with your vehicle. We work hard to offer high quality products to you at a fraction of the Dealership markup that will last longer than the competitor knock offs. Get high quality at rock bottom prices.

Compatibility 1: Match FCC ID # listed below with your current remote's FCC ID #.

Compatibility 2: Match Your part #'s listed below with your current remote's part #.

NOTE: this remote will have one of the following LOGOS; NONE, Jeep, Dodge, Chrysler, Ram > all logos are interchangeable the circuit boards are identical and the circuit boards will be UNLOCKED or new and ready to program to your vehicle


Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH. Programming Source prior to purchase to ensure they have the equipment to sync this remote to your vehicle.
DO NOT GO TO A DEALER.

HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.

This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .

PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.

Specifications

Condition NEW DJC23DGso
FCC ID OHT692713AA or OHT692715AA or OHT692427AA or KOBDT04A
Part#

68026372AA 
Part Number: 68026372AA, 68039414AA, 04589621AA, 04589261AA, 04727362AB, 04589621AC, 04589621AD, 05175843AA, 05175815AB, 56040672AE 05175815AA,68002316AA, 68003659AA
 FCC ID: OHT692713AA, OHT692427AA, OHT692715AA, KOBDT04A
 Interchangeable Part Numbers: 04589621, 68039414, 04589517, 68026372, 68003387
 04589621AA, 04589621AB, 04589621AC, 04589621AD,
 68039414AA, 68039414AB, 68039414AC, 68039414AD, 68039414AF,
 04589517AA, 04589517AB, 68026372AA, 68003387AA
IC : 5461A-692715AA
IC : 5461A-692713AA
IC : 5461A-692427AA
 Current Part Numbers: 68039414, 68039414AD, 04589621, 04589621AB
 Older Part Numbers: 68039414AA, 68039414AB, 68039414AC, 56040649AD, 04589621AA, 68026372AC
 FCC ID: OHT692713AA
 Numbers on the back of this remote:
 FCC ID: 2AOKM-CYV3B
 IC: 24223-CYV3B
 Model: RT-CYB34BS
 P/N: RT-OHT2B
 Frequency: 315 MHz
 Battery: CR2032
 Reusable (note for car locksmiths and dealers): Used remotes are reusable after unlocking / re-flashing service
 On Board Programming: No - must use diagnostic equipment to program (see your local LOCKSMITH)
 4 Buttons: Remote engine start, Lock, Unlock, Panic alarm
Dealer part # 4589621
Buttons 4: lock, unlock, remote start, panic
Frequency 315 MHz
Battery Type 1: CR2032

Additional Information

Condition Explanation: Re-Manufactured (UNLOCKED) with New Key
 	
Unlocked: An item that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle. 
Key:
Please Note: The key is new & will need to be cut to fit your vehicle's ignition. Visit your locksmith for key cutting.
______________________________________
What happens if you buy a used remote that was not unlocked / reflashed?
 Unfortunately Dodge Chrysler Jeep developed a technology in some of their key fobs that makes it impossible to re-program the Dodge Chrysler Jeep key fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these Dodge Chrysler Jeep remotes that have been cleared for you. 
UNLOCKED remotes are not eligible for return -- any returns requested/received on UNLOCKED remotes will not be authorized.
  • All remotes include working batteries (except case-only purchases)
  • A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle

Unsure if this is compatible with your vehicle?

Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.

check compatibility

Compatible Vehicles

FOR THIS FCC ID / PART #

Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012

Dodge Dakota (w/ Transponder)
Years: 2004 2005 2006 2007 2008 2009 2010 2011

Dodge Durango (w/ Transponder)
Years: 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013

Dodge Magnum
Years: 2005 2006 2007

Dodge Nitro
Years: 2007 2008 2009 2010 2011 2012

Dodge Ram 1500 2500 3500
Years: 2006 2007 2008 2009

From Our Satisfied Customers

Hey, hi, again. I'm Greg in Fremont, CA, and messsaged last week, and bought 2 fobs for my 95 Pontiac Bonneville. They came today (Monday!), and programming was almost exactly as you said. Thanks so much for your reply to my question, processing my order so fast, and having the programming info online. This was a breeze! I'm back in business with 2 key fobs, and the original as a spare, if needed for less than $13.00. Thank you again.

FIND YOUR REMOTE

Search by FCC ID or Part #

Do you have your old remote?

Does this FCC ID or Part Number appear on your remote? OHT692713AA or OHT692715AA or OHT692427AA or KOBDT04A - OR - 68026372AA Part Number: 68026372AA, 68039414AA, 04589621AA, 04589261AA, 04727362AB, 04589621AC, 04589621AD, 05175843AA, 05175815AB, 56040672AE 05175815AA,68002316AA, 68003659AA FCC ID: OHT692713AA, OHT692427AA, OHT692715AA, KOBDT04A Interchangeable Part Numbers: 04589621, 68039414, 04589517, 68026372, 68003387 04589621AA, 04589621AB, 04589621AC, 04589621AD, 68039414AA, 68039414AB, 68039414AC, 68039414AD, 68039414AF, 04589517AA, 04589517AB, 68026372AA, 68003387AA IC : 5461A-692715AA IC : 5461A-692713AA IC : 5461A-692427AA Current Part Numbers: 68039414, 68039414AD, 04589621, 04589621AB Older Part Numbers: 68039414AA, 68039414AB, 68039414AC, 56040649AD, 04589621AA, 68026372AC FCC ID: OHT692713AA Numbers on the back of this remote: FCC ID: 2AOKM-CYV3B IC: 24223-CYV3B Model: RT-CYB34BS P/N: RT-OHT2B Frequency: 315 MHz Battery: CR2032 Reusable (note for car locksmiths and dealers): Used remotes are reusable after unlocking / re-flashing service On Board Programming: No - must use diagnostic equipment to program (see your local LOCKSMITH) 4 Buttons: Remote engine start, Lock, Unlock, Panic alarm

This remote is compatible.

Quantity

This remote is not compatible.

Start a new search to find yours instantly:

Find Remote

- OR -

Get help from our knowledgeable staff:

Check Compatibility

Choose your vehicle from this list of Compatible Vehicles:







Related Products

Join Our Mailing Listget exclusive offers

unsubscribe

Connect With Usfollow us on

Shop With Confidence100% secure checkout

Credit Card Logos

Keyless Remote Warehouse
© 2024 Keyless Remote Warehouse | Privacy

Terms and Conditions

Ecommerce by Ecommerce Platform