Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Durango
Years: 2007 2008 2009 2010
Dodge Charger
Years: 2006 2007
Dodge Magnum
Years: 2006 2007
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is for ONE (1) replacement Unlocked - Virgin - ready to program FOBIK keyless remote control transmitter with an uncut key blade insert that will program to your vehicle s Factory Original Equipment O.E.M. installed RKE system.
You will need to visit your local qualified automotive locksmith for programming and key cutting. Please call them prior to purchase to be sure they have the proper equipment to sync this remote to your vehicle s RKE system.
PLEASE NOTE: When we send these remote to the tech service to unlock the circuit board chips so that you can program them to your vehicles they often replace the shell with a new one.
WHAT DOES THIS MEAN?
1. the remote you receive may or may not have a logo on it.
2. The remote you received may or may not have a different FCC ID on the back of the unit; however, the circuit board (FCC ID and Chip #) will be as described below.
PROGRAMMING 3 steps:
Programming: This remote control requires diagnostic programming available at your local qualified automotive locksmith. Please contact your programming source prior to purchase to be certain they have the proper diagnostic tools to program this remote to your vehicle.
3 Steps:
1. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition
2. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
3. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a virgin/unlocked remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This is for ONE (1) replacement Unlocked - Virgin - ready to program FOBIK keyless remote control transmitter with an uncut key blade insert that will program to your vehicle s Factory Original Equipment O.E.M. installed RKE system.
You will need to visit your local qualified automotive locksmith for programming and key cutting. Please call them prior to purchase to be sure they have the proper equipment to sync this remote to your vehicle s RKE system.
PLEASE NOTE: When we send these remote to the tech service to unlock the circuit board chips so that you can program them to your vehicles they often replace the shell with a new one.
WHAT DOES THIS MEAN?
1. the remote you receive may or may not have a logo on it.
2. The remote you received may or may not have a different FCC ID on the back of the unit; however, the circuit board (FCC ID and Chip #) will be as described below.
PROGRAMMING 3 steps:
Programming: This remote control requires diagnostic programming available at your local qualified automotive locksmith. Please contact your programming source prior to purchase to be certain they have the proper diagnostic tools to program this remote to your vehicle.
3 Steps:
1. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition
2. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
3. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a virgin/unlocked remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
Specifications
Condition |
New DJC003DDGno (DJC2 / DJC2A /DJC3) |
FCC ID |
OHT692427AA KOBDT04A or OHT692427AA
OHT692713AA |
Part# |
56038749AD Current Part Number: 05179512AA
Old Part Number: 56038749AD,56038749AG 05170486AA 589341 AC
05026112 AB
68029833 AA
05183349 AA
05179512 AA 589341AC
05026112AB
68029833AA
05183349AA
05179512AA |
Dealer part # |
05179512AA |
Buttons |
4:Trunk Release, Unlock, Lock, Panic |
Frequency |
315 MHz |
Battery Type |
1: CR2032 |
Additional Information
VIRGIN
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Durango
Years: 2007 2008 2009 2010
Dodge Charger
Years: 2006 2007
Dodge Magnum
Years: 2006 2007