Compatible Vehicles
FOR THIS FCC ID / PART #
Jeep Grand Cherokee with remote start
Years: 2014 2015 2016 2017 2018 2019 2020
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) - NEW REPLACEMENT - ready to program keyless remote control transmitter with transponder immobilizer Chip Installed that will work for your vehicle's compatible installed Factory Original Equipment O.E.M. RKE system once programmed.
Please note: the remote you will receive will have NO LOGO on the back
Compatibility 1: FCC ID/Part number on your current or last working remote MUST match with once of the PART #'s below.
Compatibility NOTE: If you are unsure as to which remote you need please contact your local qualified automotive dealer Parts department WITH YOUR vin# to obtain a part number match.
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH. Programming Source prior to purchase to ensure they have the equipment to sync this remote to your vehicle.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
This is ONE (1) - NEW REPLACEMENT - ready to program keyless remote control transmitter with transponder immobilizer Chip Installed that will work for your vehicle's compatible installed Factory Original Equipment O.E.M. RKE system once programmed.
Please note: the remote you will receive will have NO LOGO on the back
Compatibility 1: FCC ID/Part number on your current or last working remote MUST match with once of the PART #'s below.
Compatibility NOTE: If you are unsure as to which remote you need please contact your local qualified automotive dealer Parts department WITH YOUR vin# to obtain a part number match.
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH. Programming Source prior to purchase to ensure they have the equipment to sync this remote to your vehicle.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
Specifications
Condition |
New Jeep 027F5J3no |
FCC ID |
M3N-40821302 M3N40821302 |
Part# |
68143502AC
28.4082.1302.1 Continental
Compatible Part Number: 68143502AC, 68143502AB, 68066349AD, 68066349AG, 68066349
FCCID: M3N-40821302
Frequency: 433 MHz
Chip Type: 46
Buttons: Lock - Unlock - Panic
Fitment / Compatibility: Jeep Grand Cherokee (2014-2020) Dodge Durango (2014-2020)
68143505AC 68143502AA
68143502AB
Superceded part #'s - All are interchangeable:
68240167-AA 68240167AA
56046759-AA 56046759AA
68143505-AA 68143505AA
68143505-AB 68143505AB
56046759-AA 56046759AA
56046759-AB 56046759AB
56046759-AC 56046759AC
56046759-AD 56046759AD
56046759-AE 56046759AE
56046759-AF 56046759AF
56046759-AG 56046759AG
56046759-AH 56046759AH
IC # 7812A-40821302
reusable / reprogrammable chip: CHIP ID: Philips ID 46 Chrysler |
Dealer part # |
68143502AC |
Buttons |
5: Lock , Unlock, TRUNK, STARTER, Panic |
Frequency |
433 MHz |
Battery Type |
1: CR2032 |
Additional Information
UNLOCKED Keyless Remote Orders SHIPPING & HANDLING NOTE: Please add 1-week additional ship time to whichever shipping service you select on ALL UNLOCKED remote control orders.
.
Condition Explanation: Unlocked Refurbished w/ New Key
Unlocked: An item that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle.
What happens if you buy a used remote that was not unlocked / reflashed?
Unfortunately Jeep developed a technology in some of their key fobs that makes it impossible to re-program the Jeep key fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these Jeep remotes that have been cleared for you.
Key : Key is new (non-OEM). Key is uncut and will need to be cut to fit your vehicle's ignition.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Jeep Grand Cherokee with remote start
Years: 2014 2015 2016 2017 2018 2019 2020