Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Ram
Years: 2013 2014 2015 2016 2017 2018 2019 2020
(all of the following trims: 1500 2500 3500 4500 5500 Laramie Tradesman Standard Extended Big Horn Crew Cab Pickup 4-Door Lone Star Extended Crew Cab Pickup 4-Door Longhorn SLT )
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) - Unlocked /Virgin - ready to program keyless remote control transmitter with a new key blade that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
COMPATIBILITY 1: Your current remote control FCC ID # MUST match with any of the FCC ID#s listed below.
COMPATIBILITY 2: As long as your FCC ID # matches with the FCC ID listed below you can choose any button configuration (2, 3, 4, 5, 6 button)
COMPATIBILITY 3: Key blade type - please view photo to make sure you current key blade has a POINTED TIP not a flat tip.
NOTE: No Logo
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
This is ONE (1) - Unlocked /Virgin - ready to program keyless remote control transmitter with a new key blade that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
COMPATIBILITY 1: Your current remote control FCC ID # MUST match with any of the FCC ID#s listed below.
COMPATIBILITY 2: As long as your FCC ID # matches with the FCC ID listed below you can choose any button configuration (2, 3, 4, 5, 6 button)
COMPATIBILITY 3: Key blade type - please view photo to make sure you current key blade has a POINTED TIP not a flat tip.
NOTE: No Logo
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
Specifications
Condition |
New 5btn L,U,Spn,St,P 027G5no |
FCC ID |
GQ4-54T |
Part# |
68159657AD
No LOGO
68159657 AG AA AB AC AD AE AF
68159657AA
68159657AB
68159657AC
68159657AD
68159657AE
68159657AF
56046956AG
OE PART # 68159657
P/N- IC : 1470A-35T
Philips ID 46 Chrysler
MOPAR Part 68159657AG |
Dealer part # |
68159657AG |
Buttons |
5-Button: Unlock, Lock, Air Suspension, Remote Start, Panic |
Frequency |
433 MHz |
Battery Type |
1: CR2032 |
Additional Information
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Ram
Years: 2013 2014 2015 2016 2017 2018 2019 2020
(all of the following trims: 1500 2500 3500 4500 5500 Laramie Tradesman Standard Extended Big Horn Crew Cab Pickup 4-Door Lone Star Extended Crew Cab Pickup 4-Door Longhorn SLT )