Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Ram 1500 with Push Button Starter with Keyless Remote Start
Years: 2013 2014 2015 2016 2017 2018 2019
Dodge Ram 2500 with Push Button Starter with Keyless Remote Start
Years: 2013 2014 2015 2016 2017 2018 2019
Dodge Ram 3500with Push Button Starter with Keyless Remote Start
Years: 2013 2014 2015 2016 2017 2018 2019
Works with the following trims as well:
Laramie Tradesman Standard Extended Big Horn Crew Cab Pickup 4-Door Lone Star Extended Crew Cab Pickup 4-Door Longhorn SLT
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) - Unlocked /Virgin - ready to program keyless remote control transmitter with a new key blade that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
COMPATIBILITY 1: Your current remote control FCC ID # MUST match with any of the FCC ID#s listed below.
COMPATIBILITY 2: As long as your FCC ID # matches with the FCC ID listed below you can choose any button configuration (2, 3, 4, 5, 6 button)
COMPATIBILITY 3: Key blade type - please view photo to make sure you current key blade has a POINTED TIP not a flat tip.
If you are unsure contact your local dealer to verify the part # you need for your vehicle's installed RKE system.
................
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
https://www.keylessremotewarehouse.com/
This is ONE (1) - Unlocked /Virgin - ready to program keyless remote control transmitter with a new key blade that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
COMPATIBILITY 1: Your current remote control FCC ID # MUST match with any of the FCC ID#s listed below.
COMPATIBILITY 2: As long as your FCC ID # matches with the FCC ID listed below you can choose any button configuration (2, 3, 4, 5, 6 button)
COMPATIBILITY 3: Key blade type - please view photo to make sure you current key blade has a POINTED TIP not a flat tip.
If you are unsure contact your local dealer to verify the part # you need for your vehicle's installed RKE system.
................
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
https://www.keylessremotewarehouse.com/
Specifications
| Condition |
Unlocked 4btn L,U,St,P Push Button Starter 027G4DGuo |
| FCC ID |
GQ4-54T |
| Part# |
56046956AC
56046956 GQ4-54T 047629621
AG AA AB AC AD AE AF
56046956AG
56046956AA
56046956AB
56046956AC
56046956AD
56046956AE
56046956AF
OE PART # 56046956 P/N- IC : 1470A-35T
Philips ID 46 Chrysler MOPAR Part |
| Dealer part # |
56046956AC |
| Buttons |
4: Lock, Unlock, Car Vehicle Remote Starter, Panic |
| Frequency |
433 MHz |
| Battery Type |
1: CR2032 |
Additional Information
UNLOCKED Keyless Remote Orders SHIPPING & HANDLING NOTE: Please add 1-week additional ship time to whichever shipping service you select on ALL UNLOCKED remote control orders
.................
Condition Explanation: UNLOCKED VIRGIN w/ New Key
New Key: This is a new uncut keyblade which is ready to be cut to fit your vehicle's ignition.
Unlocked : An item that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle .
..................
What happens if you buy a used remote that was not unlocked / reflashed?
Unfortunately Dodge Chrysler Jeep developed a technology in some of their key fobs that makes it impossible to re-program the Dodge Chrysler Jeep key fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these Dodge Chrysler Jeep remotes that have been cleared for you.
_________________________________
PROGRAMMING 3 Steps:
REQUIRED DIAGNOSTIC PROGRAMMING; available at your local qualified automotive locksmith. Please contact them prior to purchase to verify they can program the remote to your vehicle.
1. You will need to have the key cut by a qualified automotive locksmith to match your vehicle's ignition
2. You will need to have the remote programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
3. You will need to have the transponder chip programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
UNLOCKED remotes are not eligible for return -- any returns requested/received on UNLOCKED remotes will not be authorized.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Ram 1500 with Push Button Starter with Keyless Remote Start
Years: 2013 2014 2015 2016 2017 2018 2019
Dodge Ram 2500 with Push Button Starter with Keyless Remote Start
Years: 2013 2014 2015 2016 2017 2018 2019
Dodge Ram 3500with Push Button Starter with Keyless Remote Start
Years: 2013 2014 2015 2016 2017 2018 2019
Works with the following trims as well:
Laramie Tradesman Standard Extended Big Horn Crew Cab Pickup 4-Door Lone Star Extended Crew Cab Pickup 4-Door Longhorn SLT
This remote is compatible.
This remote is not compatible.
