Compatible Vehicles
FOR THIS FCC ID / PART #
for Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012
for Dodge Dakota (transponder vehicles only)
Years: 2005 2006 2007 2008 2009 2010 2011
for Dodge Durango (transponder vehicles only)
Years: 2004 2005 2006 2007 2008 2009 2010
for Dodge Magnum
Years: 2005 2006 2007
for Dodge Nitro
Years: 2007 2008 2009 2010 2011
for Dodge Ram Pickup (transponder vehicles only)
Years: 2006 2007 2008 2009
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) Brand NEW virgin keyless remote control transmitter that will work with your vehicle's compatible Factory Original Equipment O.E.M. installed RKE (remote keyless entry) system once programmed with a new key blade.
Compatibility 1: Match FCC ID # listed below with your current remote's FCC ID #.
Compatibility 2: Match Your part #'s listed below with your current remote's part #.
NOTE: No Logo
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH. Programming Source prior to purchase to ensure they have the equipment to sync this remote to your vehicle.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
This is ONE (1) Brand NEW virgin keyless remote control transmitter that will work with your vehicle's compatible Factory Original Equipment O.E.M. installed RKE (remote keyless entry) system once programmed with a new key blade.
Compatibility 1: Match FCC ID # listed below with your current remote's FCC ID #.
Compatibility 2: Match Your part #'s listed below with your current remote's part #.
NOTE: No Logo
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH. Programming Source prior to purchase to ensure they have the equipment to sync this remote to your vehicle.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
Specifications
Condition |
New 3btn for Dodge DJC5dno |
FCC ID |
KOBDT04A |
Part# |
56038751AE
for Part Number: 05179513 56038751 05135670 05179513AA 05135670AA
for IC: 3521A-T04B
for Interchangeable Part#'s: 05183348AA, 05143608AA, 056053000AH, 05179513, 56038751, 05135670, 5175786, 05135670AA, 05179513AA, 56038751AH, 56053000AD
(May have AA AB AC AD AE AF AG AH at the end))
for FCC ID: KOBDT04A
for Chip ID: PHILIPS 46
|
Dealer part # |
56038751AE |
Buttons |
3: Unlock, Lock, Panic |
Frequency |
315 MHz |
Battery Type |
1: CR2032 |
Additional Information
Condition Explanation: Re-Manufactured (UNLOCKED) with New Key
Unlocked: A car remote fob that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle.
Key:
Please Note: The key is new & will need to be cut to fit your vehicle's ignition. Visit your locksmith for key cutting.
______________________________________
What happens if you buy a used remote that was not unlocked / reflashed?
Unfortunately Dodge Chrysler Jeep developed a technology in some of their key fobs that makes it impossible to re-program the Dodge Chrysler Jeep key fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these Dodge Chrysler Jeep remotes that have been cleared for you.
UNLOCKED remotes are not eligible for return -- any returns requested/received on UNLOCKED remotes will not be authorized.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
for Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012
for Dodge Dakota (transponder vehicles only)
Years: 2005 2006 2007 2008 2009 2010 2011
for Dodge Durango (transponder vehicles only)
Years: 2004 2005 2006 2007 2008 2009 2010
for Dodge Magnum
Years: 2005 2006 2007
for Dodge Nitro
Years: 2007 2008 2009 2010 2011
for Dodge Ram Pickup (transponder vehicles only)
Years: 2006 2007 2008 2009