Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Avenger
Years: 2008 2009 2010 2011 2012 2013 2014
Dodge Durango
Years: 2007 2008 2009
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) - NEW REPLACEMENT - ready to program keyless remote control transmitter with transponder immobilizer Chip Installed that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
This is ONE (1) - NEW REPLACEMENT - ready to program keyless remote control transmitter with transponder immobilizer Chip Installed that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
Specifications
Condition |
New fits Dodge DJC22BDGno |
FCC ID |
OHT692427AA
(Replaces OHT692713AA)
(Replaces KOBDT04A if model has transponder system) |
Part# |
68001710AA
Interchangeable FCC ID #'s:
OHT692427AA; OHT692713AA;
IC: 5461A-692427AA
Interchangeable Part #'s
68001710AA; 68092989AA; 68003389AA; 68003079AA or or 55364672AF or 68029834AA
Note:Aftermarket remote key ,no label on the back.the same function as the genuine.
Transponder chip: PCF7941A / HITAG 2 / 46 CHIP
Frequency: 315Mhz
Brand New AfterMarket
5 Buttons: Lock, Unlock, Panic , Remote Start , Hatch
Replaces FCC ID: OHT692427AA
part number #: 05026566AJ, 05175815AA,
68092982AA, 68001710AA,
68003079AA
|
Dealer part # |
68029834AA |
Buttons |
5: lock, unlock, hatch, starter, panic |
Frequency |
315 MHz |
Battery Type |
1: CR2032 |
Additional Information
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Avenger
Years: 2008 2009 2010 2011 2012 2013 2014
Dodge Durango
Years: 2007 2008 2009