Compatible Vehicles
FOR THIS FCC ID / PART #
Chrysler Town & Country
Years: 2008 2009 2010 2011 2012 2013 2014 2015 2016
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) REPLACEMENT - Virgin - ready to program keyless remote control transmitter with transponder immobilizer Chip ID: Philips ID 46 Chip Transponder Installed that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
NOTE: No Logo
Compatibility: ONE of the FCC ID #'s and one of the Part numbers LISTED BELOW MUST match with original.
Programming & Key Cutting Requirements:
This REMOTE requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
This is ONE (1) REPLACEMENT - Virgin - ready to program keyless remote control transmitter with transponder immobilizer Chip ID: Philips ID 46 Chip Transponder Installed that will work for your vehicle's installed Factory Original Equipment O.E.M. RKE system.
NOTE: No Logo
Compatibility: ONE of the FCC ID #'s and one of the Part numbers LISTED BELOW MUST match with original.
Programming & Key Cutting Requirements:
This REMOTE requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
Specifications
Condition |
New 6btn CDJA7CHno |
FCC ID |
M3N5WY783X or IYZ-C01C (Interchangeable ) |
Part# |
56046704AG
2701A-C01C
Interchangeable with 267F-5WY783X)
Philips ID 46 Chrysler Chip ID PCF7941 chip
Emergency Key: Included (New)
Y171P Ilco 597358
Strattec 598554 Strattec 598555 Strattec 691388
Compatible with the following Dodge part numbers:
56046705AA 56046705AD
56046705AE 56046705AG
05026099AD 05026099AA
05026099AB 05026099AC
05026099AG 05026099AE 05026099AF
Compatible with the following Chrysler part numbers:
05026098AA 05026098AB 05026098AC 05026098AD
05026098AE 05026098AF 05026098AG
68066868AA 68066868 AA
68043583 68043583AA
56046704AD 56046704AA
56046704AB 56046704AC
56046704AD 56046704AE
56046704AG 56046704 AA AB AC AD AE AG |
Dealer part # |
56046704AD |
Buttons |
6: Panic, UnLock, lock, Rear Liftgate Hatch, left power sliding door, right power sliding door |
Frequency |
433 MHz |
Battery Type |
1: CR2032 |
Additional Information
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Chrysler Town & Country
Years: 2008 2009 2010 2011 2012 2013 2014 2015 2016