Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Avenger
Years: 2008 2009 2010 2011 2012
Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016
Dodge Charger
Years: 2006 2007
Dodge Dakota
Years: 2005 2006 2007 2008 2009 2010 2011 2012 2013
Dodge Durango
Years: 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
Dodge Magnum
Years: 2005 2006 2007
Dodge Nitro
Years: 2007 2008 2009 2010 2011
Dodge Ram 1500 OR 2500
Years: 2006 2007 2008 2009
Dodge Ram 3500
Years: 2006 2007 2008 2009 2010
Dodge Ram 4500 5500
Years: 2008 2009 2010
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) VIRGIN ready to be programmed with battery installed FOBIK keyless remote control transmitter that will program to your vehicle's compatible RKE (remote keyless entry) system >> (remote has a VIRGIN UNLOCKED Transponder chip and a BRAND NEW case and key blade insert).
Compatibly: Match your current remotes FCC ID # and part # to one of the FCC ID and Part #s listed below.
Programming: This remote control requires diagnostic programming available at your local qualified automotive locksmith. Please contact your programming source prior to purchase to be certain they have the proper diagnostic tools to program this remote to your vehicle. Please do not go to a DEALER they typically WILL NOT program remotes for you that you did not purchase from them; furthermore they OFTEN will tell you they will program it for you and when you get to their dealership they will take your money and then tell you the remote will not work and inturn offer to have you buy one from them. Dealers will ALWAYS charge you for ONE HOUR of LABOR and it only takes 10 minutes go to a LOCKSMITH save yourself the hassle from the start!
3 Steps:
1. The valet key must be cut by a qualified automotive locksmith to match your vehicle's ignition
2. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
3. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This is ONE (1) VIRGIN ready to be programmed with battery installed FOBIK keyless remote control transmitter that will program to your vehicle's compatible RKE (remote keyless entry) system >> (remote has a VIRGIN UNLOCKED Transponder chip and a BRAND NEW case and key blade insert).
Compatibly: Match your current remotes FCC ID # and part # to one of the FCC ID and Part #s listed below.
Programming: This remote control requires diagnostic programming available at your local qualified automotive locksmith. Please contact your programming source prior to purchase to be certain they have the proper diagnostic tools to program this remote to your vehicle. Please do not go to a DEALER they typically WILL NOT program remotes for you that you did not purchase from them; furthermore they OFTEN will tell you they will program it for you and when you get to their dealership they will take your money and then tell you the remote will not work and inturn offer to have you buy one from them. Dealers will ALWAYS charge you for ONE HOUR of LABOR and it only takes 10 minutes go to a LOCKSMITH save yourself the hassle from the start!
3 Steps:
1. The valet key must be cut by a qualified automotive locksmith to match your vehicle's ignition
2. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
3. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
Specifications
| Condition |
UNLOCKED VIRGIN Dodge DJC23Ddguo/DJC5BDou |
| FCC ID |
OHT692427AA OHT692715AA Compatible with KOBDT04A & OHT692713AA (old FCC ID) (Replaces OHT692713AA) (Replaces KOBDT04A if model has transponder system) |
| Part# |
68273328AA
Interchangeable and replaceable Part #'s:
68273328 05179513AC
AA AB AC AD 56053000 & 05183348 & 05135670AA & 05179513 & 56038751
5183348ac 56053000AH
68273328AA
56040649 56040649AC 56040649 56040649AB 56040649AC
05183349 5183349 05183349AA
68000603 68000603AA
56040669 56040669AC 56040669AD
05175786 05175786AA 05175786AB
05175789 05175789AA
04589317 04589317AB
05175817 05175817AA 05175817AB
68001702 68001702AA
0502610B 05026104AB
68001708 68001708AA
68273328 68273328AB
0518334
68248774 68248774AA
05026081 05026081AD
05183683 05183683AA 05183683 05183683AC
05179512 05179512AA
IC: 267F-5WY72XX 5461A-692427AA
....Philips 46 Chip |
| Dealer part # |
56040649AC |
| Buttons |
3: lock, unlock, panic |
| Frequency |
315 MHz |
| Battery Type |
1: CR2032 |
Additional Information
Condition Explanation: Re-Manufactured (UNLOCKED) with New Key
Unlocked: An item that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle.
Key:
Please Note: The Chrysler, Mitsubishi, Jeep, and Dodge key fob is new & will need to be cut to fit your vehicle's ignition. Visit your locksmith for key cutting.
______________________________________
What happens if you buy a used remote that was not unlocked / reflashed?
Unfortunately Dodge Chrysler Jeep developed a technology in some of their key fobs that makes it impossible to re-program the Dodge Chrysler Jeep key fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these Dodge Chrysler Jeep remotes that have been cleared for you.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Avenger
Years: 2008 2009 2010 2011 2012
Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016
Dodge Charger
Years: 2006 2007
Dodge Dakota
Years: 2005 2006 2007 2008 2009 2010 2011 2012 2013
Dodge Durango
Years: 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
Dodge Magnum
Years: 2005 2006 2007
Dodge Nitro
Years: 2007 2008 2009 2010 2011
Dodge Ram 1500 OR 2500
Years: 2006 2007 2008 2009
Dodge Ram 3500
Years: 2006 2007 2008 2009 2010
Dodge Ram 4500 5500
Years: 2008 2009 2010
This remote is compatible.
This remote is not compatible.
