Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Ram Truck 1500 2500 3500 4500 5500 Pickup
Years: 2013 2014 2015 2015 2016 2017 2018
Dodge Ram 1500 2500 3500 of all trim types
Years: 2013 2014 2015 2016 2017 2018
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) fully functioning UNLOCKED / VIRGIN and ready to program replacement FOBIK keyless remote control transmitter with an uncut key blade insert that will work with your vehicle's installed compatible OEM Factory original RKE system once programmed.
Compatibility 1: FCC ID number on current remote MUST match with one of the FCC ID #s listed below.
Compatibility 2: Original remote's PART # must match one of the part #'s listed below.
PLEASE NOTE: when we unlock these remotes we often have to take them out of the original case and solder points on the board to the computer in order to return them to a refurbished virgin "ready-to-program" state. Therefore; they may or may not be re-cased into a replacement shell prior to shipment.
PROGRAMMING REQUIREMENTS:
3 Steps:
1. You will need to have the key cut by a qualified automotive locksmith to match your vehicle's ignition
2. You will need to have the remote programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
3. You will need to have the transponder chip programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a virgin/unlocked remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This is ONE (1) fully functioning UNLOCKED / VIRGIN and ready to program replacement FOBIK keyless remote control transmitter with an uncut key blade insert that will work with your vehicle's installed compatible OEM Factory original RKE system once programmed.
Compatibility 1: FCC ID number on current remote MUST match with one of the FCC ID #s listed below.
Compatibility 2: Original remote's PART # must match one of the part #'s listed below.
PLEASE NOTE: when we unlock these remotes we often have to take them out of the original case and solder points on the board to the computer in order to return them to a refurbished virgin "ready-to-program" state. Therefore; they may or may not be re-cased into a replacement shell prior to shipment.
PROGRAMMING REQUIREMENTS:
3 Steps:
1. You will need to have the key cut by a qualified automotive locksmith to match your vehicle's ignition
2. You will need to have the remote programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
3. You will need to have the transponder chip programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a virgin/unlocked remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
Specifications
Condition |
Unlocked 4btn P,U,L,Strt Twist Turn Knob CDJF3DGuo |
FCC ID |
GQ4-53T |
Part# |
56046955AF or 68105083AE
Replaces;
56046955 AA AB AC AD AE AF AG
56046955AA
56046955AB
56046955AC
56046955AD
56046955AE
56046955AG
AC AD AE AF AG
or 68105083
or 56046955
68105083AB
68105083AE
68105083AC
68105083AD
68105083AF
68105083AG
56046955AA
56046955AB
56046955AC
56046955AD
56046955AE
56046955AF
56046955AG
Chip: PHILIPS 46
IC: 1470A-34T
Chip: PHILIPS 46 IC: 1470A-34T |
Dealer part # |
|
Buttons |
Buttons: (4) Lock, unlock, and panic. car remote starter |
Frequency |
433 MHz |
Battery Type |
1: CR2032 |
Additional Information
Condition Explanation: Re-Manufactured (UNLOCKED) with New Key
Unlocked: An item that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle.
Key:
Please Note: The key is new & will need to be cut to fit your vehicle's ignition. Visit your locksmith for key cutting.
______________________________________
What happens if you buy a used remote that was not unlocked / reflashed?
Unfortunately Dodge Chrysler Jeep developed a technology in some of their key fobs that makes it impossible to re-program the Dodge Chrysler Jeep key fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these Dodge Chrysler Jeep remotes that have been cleared for you.
___________________________________
IMPORTANT NOTE: Check the number of buttons on your key before purchasing.
This key IS FOR 2013-2017 Ram Pickup models with a 4-button key.
This key IS NOT FOR 2013-2017 Ram Pickup models with a 3-button key. We have another 4-button key listed for you.
This key IS NOT FOR 2013-2017 Ram Pickup models with a 5-button key. We have another 5-button key listed for you.
.....................................
Programming:
with coding machine and special software. Locksmith or dealer will program remote for you.
The remote you purchase needs to be programmed to work on your vehicle. Programming can only be done by a dealer or automotive locksmith with the correct programming equipment for your vehicle. Fees for programming are not included in the purchase price. Please check with your local dealership or locksmith to make sure they can properly program this remote before purchasing. Purchase includes security key blank.
Programming Notes:
If you currently have two working remotes, programming can be done by using the programming instructions located in your owner s manual. If you do not have two working remotes you will need to go to a dealer or locksmith for programming.
UNLOCKED remotes are not eligible for return -- any returns requested/received on UNLOCKED remotes will not be authorized.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Ram Truck 1500 2500 3500 4500 5500 Pickup
Years: 2013 2014 2015 2015 2016 2017 2018
Dodge Ram 1500 2500 3500 of all trim types
Years: 2013 2014 2015 2016 2017 2018