Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge RAM Longhorn HD 2500 3500 4500 5500
Years: 2019 2020
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) OEM Factory UNLOCKED - reset - virginized READY TO PROGRAM OEM FACTORY keyless remote control transmitter that will work for your vehicle's compatible installed Factory Original Equipment O.E.M. RKE (remote keyless entry) system once programmed.
Compatibility: Compatibility: FCC ID/Part number on your CURRENT MUST match with the FCC ID and part # in this listing (see below).
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
This is ONE (1) OEM Factory UNLOCKED - reset - virginized READY TO PROGRAM OEM FACTORY keyless remote control transmitter that will work for your vehicle's compatible installed Factory Original Equipment O.E.M. RKE (remote keyless entry) system once programmed.
Compatibility: Compatibility: FCC ID/Part number on your CURRENT MUST match with the FCC ID and part # in this listing (see below).
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
Specifications
Condition |
Unlocked 27DG2uo |
FCC ID |
GQ4-76T |
Part# |
68374994
IC: 1470A-76T
68374994AA
68374994AB
68374994AC
Included Emergency Key 68399889AA 68399889 AA
: FCC ID OHT-482056
|
Dealer part # |
68365327AA 68365327AB 68365327AC |
Buttons |
4 buttons: Lock Unlock Remote Start Panic |
Frequency |
433 MHz |
Battery Type |
1: CR2032 |
Additional Information
Condition Explanation: Unlocked Refurbished w/ New Key
Unlocked: An item that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle.
What happens if you buy a used remote that was not unlocked / reflashed?
Dodge developed a technology in some of their key fobs that makes it impossible to re-program the Dodge key fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these Dodge remotes that have been cleared for you SO THEY ARE READY TO PROGRAM.
Key : Key is new (non-OEM). Key is uncut and will need to be cut to fit your vehicle's ignition.
Programming and Key Cutting:
Your remote requires diagnostic programming available at your local LOCKSMITH.
DO NOT GO TO A DEALER.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This takes 5-10 minutes to do. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer in the end ALWAYS .
PROGRAMMING THE REMOTE THREE (3) Steps:
1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system.
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition.
UNLOCKED remotes are not eligible for return -- any returns requested/received on UNLOCKED remotes will not be authorized.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge RAM Longhorn HD 2500 3500 4500 5500
Years: 2019 2020