Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Avenger
Years: 2008 2009 2010 2011 2012 2013 2014
Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012
Dodge Caravan
Years: 2004 2005 2006 2007
Dodge Charger
Years: 2005 2006 2007
Dodge Dakota
Years: 2005 2006 2007 2008 2009 2010 2011
Dodge Durango
Years: 2005 2006 2007 2008 2009 2010
Dodge Grand Caravan
Years: 2004 2005 2006 2007
Dodge Magnum
Years: 2005 2006 2007
Dodge Nitro
Years: 2007 2008 2009 2010 2011 2012
Dodge Ram Truck Pickup
Years: 2006 2007 2008 2009 2010 2011 2012 2013 2014
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is a id 46 chip ignition transponder key - ready to have the immobilizer chip synced with your car and the key cut by a locksmith.
Programming & Key Cutting Requirements:
This Key requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the key for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer
2 Steps:
1. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This is a id 46 chip ignition transponder key - ready to have the immobilizer chip synced with your car and the key cut by a locksmith.
Programming & Key Cutting Requirements:
This Key requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the key for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer
2 Steps:
1. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition
2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine.
HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA:
1.Go to google.com
2. Type in the words: Automotive locksmith
3. Then type in your ZIP code
4. click search
5. google will compile a list of local automotive locksmiths for you!
6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
Specifications
| Condition |
New id: 46 Dodge T-3Xno |
| FCC ID |
Y164-PT |
| Part# |
692352, ID 46 CHIP
PHILIPS 46 (Circle-Plus)
Strattec 692352
Strattec 692353
Strattec 690654
Strattec 691718
Strattec 690653
Strattec 691729
Strattec 692960
Ilco Y164-PT
Ilco Y165PT
HATA HAT1718
A-1 CHY-250
JMA TP06VCHR15P
05086276AA
05086275AA
05102247AA
05134937AA |
| Dealer part # |
692352 |
| Buttons |
N/A |
| Frequency |
N/A |
| Battery Type |
N/A |
Additional Information
New Key: This is a new uncut keyblade which is ready to be cut by an auto locksmith to fit your vehicle's ignition.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Avenger
Years: 2008 2009 2010 2011 2012 2013 2014
Dodge Caliber
Years: 2007 2008 2009 2010 2011 2012
Dodge Caravan
Years: 2004 2005 2006 2007
Dodge Charger
Years: 2005 2006 2007
Dodge Dakota
Years: 2005 2006 2007 2008 2009 2010 2011
Dodge Durango
Years: 2005 2006 2007 2008 2009 2010
Dodge Grand Caravan
Years: 2004 2005 2006 2007
Dodge Magnum
Years: 2005 2006 2007
Dodge Nitro
Years: 2007 2008 2009 2010 2011 2012
Dodge Ram Truck Pickup
Years: 2006 2007 2008 2009 2010 2011 2012 2013 2014
This remote is compatible.
This remote is not compatible.
