We are OPEN & here to serve you. Still Shipping Daily!
12% OFF orders of TWO or more discount applied at checkoutOrder by 1PM EST for Same-Day Shipping
Phone Orders: 
1-877-240-35978am - 6pm EST
30 DAY GUARANTEE 
Menu avatar

keyless remote for Pontiac FCC ID OUC60270 OUC60221 keyfob car starter key fob - New 4btn Pontiac OUC60270 w/Starter 086PNTno


Loading Images...
keyless remote for Pontiac FCC ID OUC60270 OUC60221 keyfob car starter key fob

Condition: New 4btn Pontiac OUC60270 w/Starter 086PNTno

Reg. Price: $256

Our Price: $33.87

Quantity

In-Stock. May ship same day if ordered by 12pm.

Choose another option:


Compatible Vehicles

FOR THIS FCC ID / PART #

Pontiac Torrent
Years: 2007 2008 2009


Unsure if this is compatible with your vehicle?

Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.

check compatibility

What are you purchasing?

This is ONE (1) NEW replacement keyless entry remote control that will work with your OEM (Original Equipment Manufacturer) Factory installed RKE system.

Compatibility: The remote FCC ID is the only important number on this remote - please make sure you need FCC ID OUC60270 or OUC60221 (not FCC ID: KOBGT04A)


Programming: You will need to program this remote to your vehicle in order for it to work with your vehicle. You will need the remote and the vehicle together to perform programming. Please scroll below to additional details for more information on programming or click the PROGRAM TAB above to locate the program requirements for your vehicle.

What are you purchasing?

This is ONE (1) NEW replacement keyless entry remote control that will work with your OEM (Original Equipment Manufacturer) Factory installed RKE system.

Compatibility: The remote FCC ID is the only important number on this remote - please make sure you need FCC ID OUC60270 or OUC60221 (not FCC ID: KOBGT04A)


Programming: You will need to program this remote to your vehicle in order for it to work with your vehicle. You will need the remote and the vehicle together to perform programming. Please scroll below to additional details for more information on programming or click the PROGRAM TAB above to locate the program requirements for your vehicle.

Specifications

Condition New 4btn Pontiac OUC60270 w/Starter 086PNTno
FCC ID OUC60270 and OUC60221
Part#

15913421 20952474, 20868672, 22759546, 22936098
GM Part Numbers ACDELCO

IC#: CAN: 850K60270 or 850K60221

IC 850K60270 850K60221
Dealer part # 22936098
Buttons 4: Remote Start (starter) , Lock, Unlock, Panic
Frequency 315 MHz
Battery Type 1: CR2032

Additional Information

PROGRAMMING: The remote you purchase needs to be programmed to work on your vehicle. You can do this yourself up to model year 2010. In 2011 GM removed the on-board programming procedure.  2011 and later model-year vehicles can only be programmed by a dealer or locksmith with programming equipment.  Also see below.

Programming Notes: Suzuki XL-7 & Saturn Vue do not come with programming instructions. You will need to go a dealership or automotive locksmith for programming. Also starting in 2011 GM took away the on board programming option for all vehicles. Vehicles 2011 & up will need to go to a dealership or automotive locksmith to program the remote.
________________________________

Programming Requirements:
................................

2007 2008 2009 2010 GMC ACADIA & 2007 2008 2009 Cadillac SRX PROGRAMMING REQUIREMENTS:
...................
This information is in your Owners Manual in the 
Drivers Information Center Section.
.........................
1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE  displays
4.  Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.On vehicles with memory recall seats, the first remote learned will match Driver 1 and the second will match Driver 2.     
5.  To program additional remotes at this time repeat step 3.This vehicle can have a maximum of eight remotes programmed.
6.  To exit programming mode turn key off and remove key.
     Test remote(s).
_________________________________

2010 2011 Cadillac SRX PROGRAMMING REQUIREMENTS:
.............................. 
   You have one programmed remote and you want to add another. 
........................
1. Vehicle must be off.
2. Place the working remote(s) in the cupholder. Have the new remote with you.
3. Insert the key into the key lock cylinder located on the outside of drivers door.
4.Turn the key to the unlock position five times with in ten seconds.
5. The (DIC) Driver Information Center displays Ready to Learn Electronic key #2, 3, 4 ETC.
6. Place the new remote into the transmitter pocket with the buttons facing the front of the vehicle. (The transmitter pocket is inside the center console between the driver and front passenger seats). The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket.
7. Press the ignition. When the remote is learned the DIC display will show that it is ready to program the next remote.
8. Remove the remote from the transmitter pocket and press unlock on the remote.
9. To program additional remotes, repeat Steps 6 through 8. 
10. When all additional transmitters are programmed, press and hold the ignition for ten seconds to exit programming mode.

....................................
      You have no working remotes.  
.......................
1. The vehicle must be off.
2. Insert the key into the key lock cylinder located on the outside of drivers door. 
3.Turn the key to the unlock position five times with in ten seconds.
4. The (DIC) Driver Information Center displays REMOTE LEARN PENDING, PLEASE WAIT.
5. Wait for ten minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press the ignition. The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT. 
6. Repeat Step 5 two additional times. After the third time all previously known remotes will no longer work with the vehicle. Remaining remotes can be relearned during the next steps. The DIC display should now show READY FOR REMOTE #1 
7.  Place the new remote into the transmitter pocket with the buttons facing the front of the vehicle. (The transmitter pocket is inside the center console between the 
    driver and front passanger seats). The storage area will need to be opened and the storage tray lifted up to access the transmitter pocket.
8. Press the ignition. When the remote is learned the DIC display will show that it is ready to program the next remote.
9. Remove the remote from the transmitter pocket and press unlock on the remote.
10. To program additional remotes, repeat Steps 7 through 9.
11.  When all additional transmitters are programmed, press and hold the ignition for ten seconds to exit programming mode.

_________________________________

2008 2009 2010 BUICK ENCLAVE & CHEVY TRAVERSE PROGRAMMING REQUIREMENTS:

.......................
Drivers Information Center Section.
...........................

1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
4. Press and hold the lock and unlock buttons on the keyless remote at the same
time for approximately 15 seconds. A chime will sound indicating that the remote is
programmed.
5. To program additional remotes at this time repeat step 4.
This vehicle can have a maximum of eight remotes programmed.
6. To exit programming mode turn key off and remove key.
Test remote(s).

..............................
Use this Procedure for Vehicles without
Drivers Information Center Buttons
.........................

To access this display, the vehicle must be in Park (P) with key in the on position (as far
as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays.
2. Press and hold the trip odometer reset stem for three seconds.
The message REMOTE KEY LEARNING ACTIVE will display
3. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is
programmed.
4. To program additional remotes at this time repeat step 3.This vehicle can have a maximum of eight remotes programmed.
5. To exit programming mode turn key off and remove key.
Test remote(s).
________________________________________

2011 2012 2013 BUICK ENCLAVE & CHEVY TRAVERSE & GMC ACADIA PROGRAMMING REQUIREMENTS:

The manufacturer programming requirements state:
There is no manual on board procedure to program a keyless remote to this vehicle. This vehicle requires special equipment be connected to the vehicle to program the remote. Please visit your local locksmith. 

Programming Instructions
Use this Procedure for Vehicles with
Driver Information Center Buttons
This information is in your Owners Manual in the Drivers Information Center Section.
1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until
    PRESS TO RELEARN REMOTE KEY displays 
3. Press the set/reset button until 
 REMOTE KEY LEARNING ACTIVE displays
4.  Press and hold the lock and unlock buttons on the keyless remote at the same time for approx. 15 seconds. A chime will sound indicating that the remote is programmed.
5.  To program additional remotes at this time repeat step 4.
      This vehicle can have a maximum of eight remotes programmed.
6.  To exit programming mode turn key off and remove key.
     Test remote(s).
Use this Procedure for Vehicles without Drivers Information Center Buttons
To access this display, the vehicle must be in Park (P) with key in the on position (as far  as you can go without cranking engine)
1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 
2. Press and hold the trip odometer reset stem for three seconds.
    The message REMOTE KEY LEARNING ACTIVE  will display 
3.  Press and hold the lock and unlock buttons on the first keyless remote at the same  time for approximately 15 seconds. A chime will sound indicating that the remote is  programmed.
4.  To program additional remotes at this time repeat step 3.
     This vehicle can have a maximum of eight remotes programmed.
5.  To exit programming mode turn key off and remove key.     Test remote(s).

  • All remotes include working batteries (except case-only purchases)
  • A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle

Unsure if this is compatible with your vehicle?

Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.

check compatibility

Compatible Vehicles

FOR THIS FCC ID / PART #

Pontiac Torrent
Years: 2007 2008 2009


From Our Satisfied Customers

Hey, hi, again. I'm Greg in Fremont, CA, and messsaged last week, and bought 2 fobs for my 95 Pontiac Bonneville. They came today (Monday!), and programming was almost exactly as you said. Thanks so much for your reply to my question, processing my order so fast, and having the programming info online. This was a breeze! I'm back in business with 2 key fobs, and the original as a spare, if needed for less than $13.00. Thank you again.

Do you have your old remote?

Does this FCC ID or Part Number appear on your remote? OUC60270 and OUC60221 - OR - 15913421 20952474, 20868672, 22759546, 22936098 GM Part Numbers ACDELCO IC#: CAN: 850K60270 or 850K60221 IC 850K60270 850K60221

This remote is compatible.

Quantity

This remote is not compatible.

Start a new search to find yours instantly:

Find Remote

- OR -

Get help from our knowledgeable staff:

Check Compatibility

Choose your vehicle from this list of Compatible Vehicles:



Related Products