Condition: Pre-Owned w/ New 4d63 Key 246A2po
Reg. Price: $399.96
Our Price: $298.99
Quantity
In-Stock. May ship same day if ordered by 12pm.
Compatible Vehicles
FOR THIS FCC ID / PART #
Mazda CX7 CX-7 (without hatch) Years: 2010 2011 2012 2013 2014
Mazda CX9 CX-9 (without hatch) Years: 2010 2011 2012 2013 2014
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is ONE (1) Factory Original Equipment O.E.M. keyless remote control transmitter with a new key blade installed. Compatibility: Please be sure that your current remote matches the FCC ID # listed below. Programming & Key Cutting Requirements: This REMOTE requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer 3 Steps: 1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system. 2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine. 3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA: 1.Go to google.com 2. Type in the words: Automotive locksmith 3. Then type in your ZIP code 4. click search 5. google will compile a list of local automotive locksmiths for you! 6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
This is ONE (1) Factory Original Equipment O.E.M. keyless remote control transmitter with a new key blade installed. Compatibility: Please be sure that your current remote matches the FCC ID # listed below. Programming & Key Cutting Requirements: This REMOTE requires diagnostic programming available at your local qualified automotive locksmith. Please note: This service takes 5-10 minutes. Go to a local locksmith please do NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer 3 Steps: 1. The remote must be programmed by a qualified automotive locksmith to your vehicle's installed RKE system. 2. The transponder chip (contained on the remote circuit board) must be programmed by a qualified automotive locksmith to sync with your vehicle's immobilizer to start your engine. 3. The key must be cut by a qualified automotive locksmith to match your vehicle's ignition HOW TO FIND AN AUTOMOTIVE LOCKSMITH IN YOUR AREA: 1.Go to google.com 2. Type in the words: Automotive locksmith 3. Then type in your ZIP code 4. click search 5. google will compile a list of local automotive locksmiths for you! 6. Call them and tell them you have a remote for (your) Make Model & Year vehicle - And ASK if they have the equipment to sync it with your car.
Specifications
Condition
Pre-Owned w/ New 4d63 Key 246A2po
FCC ID
WAZX1T768SKE11A04 /WAZX1T763SKE11A04
Part#
662F-SKE11A04 NHY8675RYA ; NHY8675RY 4d-63 80 Bit Transponder Key EHY5-67-5RYA
Key Blade contains Transponder chip Type:
4D-63 80-Bit
Key Replaces the Following Key Types:
Mazda OEM D6Y1-67-2GXC
Mazda OEM KDY3-76-201
Mazda OEM D6Y1-76-2GXB
Code Series: 10100-12283
Tex 4D-63 80-Bit
MZ31
Dealer part #
EHY5-67-5RYA
Buttons
3: Unlock, Lock, Panic w/ New Key
Frequency
315 MHz - Red Led Light
Battery Type
1: CR2025
Additional Information
Condition Explanation: Pre-Owned w/ New Transponder Key
Pre-Owned: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections.
New Key: This is a new uncut keyblade which is ready to be cut to fit your vehicle's ignition. The 4D-63 80 Bit transponder / immobilizer chip is installed and ready to be programmed to your vehicle by an auto locksmith.
All remotes include working batteries (except case-only purchases)
A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Mazda CX7 CX-7 (without hatch) Years: 2010 2011 2012 2013 2014
Mazda CX9 CX-9 (without hatch) Years: 2010 2011 2012 2013 2014