Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Charger
Years: 2008 2009 2010 2011 2012 2013 2014
Dodge Challenger
Years: 2008 2009 2010 2011 2012 2013 2014
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
This is a fully functioning and ready to program FOBIK keyless remote control transmitter with an uncut key blade insert.
This is a fully functioning and ready to program FOBIK keyless remote control transmitter with an uncut key blade insert.
Specifications
Condition |
UNLOCKED CDJd or CDJb2 |
FCC ID |
M3N5WY783X or IYZ-C01C (both work the same)
|
Part# |
68044059AA Some of the old part numbers include: 05026315AC, 68040590AA
(all part numbers work the same)
Chip ID: Philips ID 46 Chrysler
Emergency Key: Included (New) |
Dealer part # |
|
Buttons |
Buttons: (4) Lock, unlock, Trunk, and panic. |
Frequency |
433 MHz |
Battery Type |
1: CR2032 |
Additional Information
UNLOCKED Keyless Remote Orders SHIPPING & HANDLING NOTE: Please add 1-week additional ship time to whichever shipping service you select on ALL UNLOCKED remote control orders.
Condition Explanation: Pre-Owned & Unlocked w/ New Key
Unlocked: An item that has been used previously and has now been reflashed so that YOU can have it RE-Programmed successfully to your vehicle.
KEY:
Please Note: The key is new & will need to be cut to fit your vehicle's ignition.
......................................
What happens if you buy a used remote that was not unlocked / reflashed?
Unfortunately "Dodge Chrysler Jeep" developed a technology in some of their key fobs that makes it impossible to re-program the "Dodge Chrysler Jeep" smartkey fob to another vehicle unless the key fob remote has been erased or flashed. Once the key fob is programmed to a vehicle, it can only be re-programmed to that vehicle unless an erase or flash service is done. We ONLY sell these "Dodge Chrysler Jeep" remotes that have been cleared for you.
___________________________________
Programming:
with coding machine and special software. Locksmith or dealer will program remote for you.
The remote you purchase needs to be programmed to work on your vehicle. Programming can only be done by a dealer or automotive locksmith with the correct programming equipment for your vehicle. Fees for programming are not included in the purchase price. Please check with your local dealership or locksmith to make sure they can properly program this remote before purchasing. Purchase includes security key blank.
_____________________________
DIY
Programming Notes:
If you currently have two working remotes, programming can be done by using the programming instructions located in your owner’s manual. If you do not have two working remotes you will need to go to a dealer or locksmith for programming.
Programming Instructions
**You MUST HAVE two working programmed transmitters before
you can add a third transmitters.
**If you only have ONE WORKING TRANSMITTER and want to add a
second transmitter this procedure WILL NOT WORK.
*** Click here to Find a Locksmith in your area to program transmitter
if you only have one or none working transmitters.
1. Using first programmed transmitter turn ignition to the ON position
for 3 seconds but no longer than 15 seconds.
(Do not crank engine). Turn transmitter off and remove.
2. Within 15 seconds insert second working programmed transmitter.
Turn ignition to the ON position (Do not crank engine) After 10 seconds
an acoustic signal will be heard and immobilizer warning lamp wil
flash. Turn transmitter OFF and remove second programmed
transmitter.
3. Within 60 seconds insert third NEW non-programmed transmitter into
ignition and turn to the ON position (Do not crank engine).
After 10 seconds an acoustical signal will be heard and immobilizer
warning lamp will illuminate for 3 seconds.
4. Turn transmitter to the OFF position and remove.
5. Test transmitters.
Repeat procedure for additional transmitters if required.
A maximum of 8 transmitters can be programmed.
UNLOCKED remotes are not eligible for return -- any returns requested/received on UNLOCKED remotes will not be authorized.
- All remotes include working batteries (except case-only purchases)
- A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle
Unsure if this is compatible with your vehicle?
Your vehicle may need a different FCC ID / Part Number depending on your installed Remote Keyless Entry System (RKE): Factory, Dealer or Aftermarket. If you are unsure what system is installed, check your current remote, send us a photo, or contact us.
check compatibility
Compatible Vehicles
FOR THIS FCC ID / PART #
Dodge Charger
Years: 2008 2009 2010 2011 2012 2013 2014
Dodge Challenger
Years: 2008 2009 2010 2011 2012 2013 2014